The PrinterCommunication type exposes the following members.
Constructors
| Name | Description | |
|---|---|---|
 | PrinterCommunication |
Properties
| Name | Description | |
|---|---|---|
 | CommunicationType |
Gets or sets the printer communication type. Default value is USB
|
| NetworkIPAddress |
Gets or sets the Internet Protocol (IP) address assigned to the printer. Default value is None
|
| NetworkPort |
Gets or sets the port number assigned to the printer. Default value is 0
|
| NetworkTimeout |
Gets or sets the network amount of time in milliseconds. Default value is 1500
|
| ParallelPortName |
Gets or sets the parallel port name, for example LPT1. Default value is "LPT1"
|
| SerialPortBaudRate |
Gets or sets the serial port baud rate in bits per second. Default value is 9600
|
| SerialPortDataBits |
Gets or sets the serial port standard length of data bits per byte. Default value is 8
|
| SerialPortFlowControl |
Gets or sets the handshaking protocol for serial port transmission of data. Default value is XOnXOff
|
| SerialPortName |
Gets or sets the serial port name, for example COM1. Default value is "COM1"
|
| SerialPortParity |
Gets or sets the serial port parity-checking protocol. Default value is None
|
| SerialPortStopBits |
Gets or sets the serial port standard number of stopbits per byte. Default value is One
|
| Stream |
Gets or sets System.IO.Stream object for writing printer commands to. It is used only if the CommunicationType property is set up to Stream value. Default value is Null
|
See Also
